H3C WA Series Command Reference Manual page 17

Radio-type 11a, channel auto(157), power(dBm) 19 auto (4)
Received: 0 authentication frames, 0 association frames
Sent out: 0 authentication frames, 0 association frames
Stations: 0 associating, 0 associated
Input : 30007 packets, 1536614 bytes
: 13565 unicasts, 520774 bytes
: 16442 broadcasts, 1015840 bytes
: 0 fragmented
: 5687 discarded, 263913 bytes
: 0 duplicates, 3054 FCS errors
: 2 decryption errors
Output: 10002 packets, 1154819 bytes
: 10002 unicasts, 1154819 bytes
: 0 broadcasts, 0 bytes
: 0 fragmented
: 1686 discarded, 195145 bytes
: 0 failed RTS, 2813 failed ACK
: 8570 transmit retries, 2200 multiple transmit retries
Table 4-2 display interface wlan-radio command output description
Field
WLAN-Radio1/1 current state
IP Packet Frame Type
Hardware Address
Description
Radio-type 11a
channel auto(157)
power(dBm) 19 auto (4)
Received: 0 authentication frames, 0
association frames
Sent out: 0 authentication frames, 0
association frames
Physical-layer link state of the WLAN-Radio interface
Encapsulation type of the frames that the interface sends out
MAC address of the frames that the interface sends out
Description of the interface
Radio type of the interface
Channel used by the interface. The keyword auto means the
channel is automatically selected and 157 is the number of the
selected channel.
If the channel is manually selected, the field will be displayed in
the format of channel configured-channel.
Available channels depend on the country code and radio type.
Transmit power of the interface (in dBm). The value 19 is the
transmit power configured by the user; auto indicates that the
actual power is different from that configured by the user; the
bracketed number, is the current transmission power, 4 dBm in
this sample output. (If spectrum management and power
constraint have been configured for the 802.11a bands, the
actual transmit power on the interface may be different from the
configured value, depending on the configuration of two
commands: max-power and power-constraint.) For more
information about the max-power command and the
power-constraint command, see WLAN Service and WLAN
RRM in the WLAN Command Reference.
If the protocol being used is not 802.11a or the power constraint
function on the 802.11a frequencies is not configured even
though 802.11a is used, this field will be displayed as
power(dBm) configured-power.
The number of received authentication frames, and the number
of received association frames.
The number of sent authentication frames, and the number of
sent association frames.
4-5
Description