H3C WA Series Command Reference Manual page 3

Preface
The H3C WA documentation set includes 10 command references, which describe the commands and
command syntax options available for the H3C WA series WLAN access points.
The WLAN Command Reference describes WLAN interface, WLAN service, WLAN security, WLAN
RRM, WLAN IDS, WLAN QoS, and WDS configuration commands.
This preface includes:
Audience
Conventions
About the H3C WA Documentation Set
Obtaining Documentation
Documentation Feedback
Audience
This documentation is intended for:
Network planners
Field technical support and servicing engineers
Network administrators working with the WA series
Conventions
This section describes the conventions used in this documentation.
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
&<1-n>
#
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are
optional.
Braces enclose a set of required syntax choices separated by vertical bars,
from which you select one.
Square brackets enclose a set of optional syntax choices separated by vertical
bars, from which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by
vertical bars, from which you select at least one.
Asterisk marked square brackets enclose optional syntax choices separated by
vertical bars, from which you may select multiple choices or none.
The argument or keyword and argument combination before the ampersand (&)
sign can be entered 1 to n times.
A line that starts with a pound (#) sign is comments.
Description