H3C WA Series Command Reference Manual page 75

View
System view
Default Level
2: System level
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the wlan uplink-interface mesh-link command to configure a mesh-link radio interface as the
uplink.
Use the undo wlan uplink-interface mesh-link command to remove the configured uplink.
By default, no radio interface is configured as an uplink interface.
If only mesh-link radios are configured as uplinks and all the links are down, WLAN services on
other radios will be stopped.
If no uplinks are configured, WLAN service will be provided.
A mesh-link radio interface cannot be configured as an uplink if no mesh profile is mapped to it.
Unmapping a mesh profile from a radio that is configured as an uplink can be done only after the
uplink configuration is removed from that radio.
Examples
# Configure the mesh-link radio interface as an uplink interface.
<Sysname> system-view
[Sysname] wlan uplink-interface mesh-link wlan-radio 1/0/1
9-13