4
Bild 4/Fig.4
1404b
Einbau
mechanisch, pneumatisch
• Drehen Sie den PEV (Schlüssel-
weite 27) in den vorgesehenen
Druckluftanschluß (Anziehdreh-
moment: max. 50 Nm).
elektrisch
• Verwenden Sie eine Winkeldose
gemäß Zubehör mit einem Kabel.
• Stellen Sie sicher, daß das Kabel
folgendermaßen verlegt ist:
- quetschfrei
- knickfrei
- dehnungsfrei
Fitting
Mechanical, pneumatic
• Screw the PEV into the desired
compressed air connection using a
27 mm A/F spanner and tighten to
max. 50 Nm.
Electrical
• Use an angled socket according to
Accessories and a cable.
• Ensure that the cable is laid so that
it is
- not crushed
- not kinked
- free of strain
D/GB 5