Connecting To Power; Table 5-5: Power Specifications - AudioCodes MediaPack Series Hardware Installation Manual

5.6

Connecting to Power

The device receives power from a standard alternating current (AC) electrical outlet. The
connection is made using the supplied AC power cord. The device can host up to two hot-
swappable Power Supply modules for load-sharing and power redundancy in case of
failure in one of the modules. To replace a faulty power supply module, see Section 6.5.
Physical Specification
Input Voltage
AC Input Frequency
Max. AC Input Current
Max. Power Consumption
Note: If you are using two Power Supply modules, connect each one to a different AC
power supply source. The two AC power sources must have the same ground potential.
ご注 意
本製品に添付の電源ケーブルは、MP-1288
に専用設計されているため、汎用性がありません.
本電源ケーブルを他の機器に使用されないよう、ご注意ください.
Hardware Installation Manual

Table 5-5: Power Specifications

Dual universal AC power supply 100-240V ᷉
50/60 Hz
10 A
FXS Interfaces
288
216
144
44
Value
Short Haul (W) Long Haul (W)
450
400
350
Document #: LTRT-28030
MP-1288
950
770
600