Rear Panel Description; Table 3-7: Rear Panel Description; Figure 3-4: Rear Panel Description - AudioCodes MediaPack Series Hardware Installation Manual

Hardware Installation Manual
3.3

Rear Panel Description

The device's rear panel is shown in the figure below and described in the subsequent table.
Note: The figure above is used only as an example. The number of installed FXS blades
and Power Supply modules depends on your ordered hardware configuration.
Item # Label
1 CPU
2 PS1 / PS2
3 Blades:
S1 / S2 / S3 / S4
FXS Ports:
FXS 1-24 / FXS 25-48 /
FXS 49-72
4
MediaPack Analog Gateways

Figure 3-4: Rear Panel Description

Table 3-7: Rear Panel Description

CPU module providing the central processing unit and various
network port interfaces. For more information, see Section 3.3.1
on page 20.
Power Supply modules. For more information, see Section 3.3.3
on page 23.
FXS blades providing FXS port interfaces. For more information,
see Section 3.3.2 on page 21.
Protective grounding for connecting a grounding lug for chassis
ground connection for ESD-preventive equipment or a grounding
wire.
19
3. Physical Description
Description
MP-1288