Hardware Installation Manual
3
Physical Description
This section provides a physical description of the device.
3.1
Physical Dimensions and Operating Environment
The device's physical dimensions and operating environment are listed in the table below:
Table 3-1: Physical Dimensions and Operating Environment
Physical Specification
Dimensions (H x W x D)
Weight
Environmental
3.2
Front Panel Description
The device's front panel is shown in the figure below and described in the subsequent
table.
Item #
Label
1
-
2
SYS / TEL / PWR
/ FAN
MediaPack Analog Gateways
3U high, 19-inch rack wide
132.5 x 438 x 482.5 mm (5.22 x 17.24 x 19 inches)
21 kg (46.3 lbs.) for fully-populated chassis
Operational: 0 to 40°C (41 to 104°F)
Storage: -40 to 70°C (-40 to 158°F)
Humidity: 5 to 90% non-condensing
Over-voltage protection and surge immunity: ITU-T K.21
(basic) compliant.
Note: Routing of FXS telephony cables outdoors can only
be done in conjunction with AudioCodes-approved
primary surge protector and proper installation and
grounding.
Figure 3-1: Front Panel
Table 3-2: Front Panel Description
Fan Tray cover. For more information, see Section 3.2.2 on page 18.
Front-panel LEDs. For more information, see Section 3.2.1 on page 16.
15
3. Physical Description
Description
Description
MP-1288