3.3.4.4
Power Supply LED
The Power Supply module, located on the chassis rear panel, provides a LED which
indicates the operating status of the module, as described in the table below.
Color
Green
Amber
Flashing
-
Hardware Installation Manual
Table 3-14: Power Supply Module LED Description
State
On
Connected to power source, chassis receiving power, and Power
Supply module's fan operating normally.
Connected to power source, but chassis not receiving power or
fault detected in Power Supply module's fan.
If the chassis houses two Power Supply modules, but only one of
them is connected to the power source, the LED on the Power
Supply module that is not connected flashes amber.
Off
No power received from power source.
Description
26
MP-1288
Document #: LTRT-28030