Tcp/Ip Configuration For Windows 2000 - Arris Touchstone DTM602G Setup Manual

Getting
Safety
Started
Home Prev Next
Battery Modem
Installation Installation
Handset Ethernet
Installation Configuration

TCP/IP Configuration for Windows 2000

Follow these steps to configure the TCP/IP settings on a Windows 2000 operating
system.
NOTE: Dialog boxes shown on your computer may differ slightly from those shown
in this procedure.
1. From the computer, select Start > Settings > Network and Dial-up
Connections > Local Area Connection.
2. In the Local Area Connections Properties window, highlight TCP/IP by clicking
on it one time, then click on Properties.
Note: If your computer has more than one Ethernet card, you may have to
select the appropriate Ethernet card in the Connect using: area of the Local
Area Connection Properties window.
Touchstone DTM602G Telephony Modem Setup Guide
About the Trouble-
Usage
Handset shooting
Glossary
27