Table of Contents
Advertisement
Troubleshooting
Problem
No 5-in-1 sensor
or lightning sensor
reception
no bars
Outdoor
temperature
is flashing or
showing dashes
Inaccurate forecast
Inaccurate
temperature or
humidity
• Relocate the display and/or the sensor. The units must be
within 330 ft (100 m) of each other.
• Make sure all units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the wireless
communication (such as TVs, microwaves, computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -20ºC/-4ºF). Do not use
heavy duty or rechargeable batteries.
a few minutes for display and sensors to synchronize after
batteries are replaced.
• Synchronize the units:
1. Bring both sensors and display indoors and remove
power adapter/batteries from all.
2. Reinstall batteries in outdoor sensors.
3. Reinstall power adapter/batteries in display.
4. Let the units sit within a couple feet of each other for a
few minutes to gain a strong connection.
Flashing of the outdoor temperature may be an indication of
wireless interference.
• Make sure the A-B-C switch in the battery compartments the
display and both sensors are switched to the same letter.
You may choose A, B or C; but units must match to sync up.
Sometimes changing to a different channel can help.
• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the display?
Learning Mode must complete before forecast and
pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery removal
or resetting the display will restart Learning Mode. After 14
days, forecast should be fairly accurate, however Learning
Mode calibrates for a total of 33 days.
• Make sure both the display and 5-in-1 sensor are placed
away from any heat sources or vents
(see page 13).
• Make sure both units are positioned away from moisture
sources (see page 13).
• Make sure 5-in-1 sensor is mounted at least 1.5 m (5 ft)
off of the ground.
• Calibrate indoor and outdoor temperature and humidity
(see page 24).
22
Possible Solution
It may take
NOTE:
Hide quick links:
Advertisement
Table of Contents
