Replacing The Handset Bracket - VTech LS6217 User Manual

Getting started

Replacing the handset bracket

Your telephone comes with two additional handset brackets. If desired,
choose either one to replace the current to suit your mood or match
your room decor.
To remove the handset bracket
1. If you have installed a handset back image card, see the section
To remove the back image card on page 11 to remove the clear
plastic cover and the back image card. Otherwise, directly skip to
step 2.
2. See the section Battery installation on page 7 to remove the battery
compartment cover and the battery.
3. Lift the right large tab from slot
release the right end of the handset
bracket.
4. Hold the right end of the handset bracket
then push it up to release the small tabs
form the slots on the right of the handset.
5. Lift the left large tab from slot
release the left end of the handset
bracket.
6. Hold the left end of the handset bracket
then push it up to release the small tabs
form the slots on the left and the top of
the handset.
7. Take away the handset bracket.
to
to
2