Table of Contents
Advertisement
Batteries
Battery care and maintenance
After your battery is fully charged, you can expect the following performance:
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
* Handset is off the base unit or charger but not in use .
replaced .
• The battery needs charging when:
• To reduce the
risk of fire or
injury to persons
or damage to
the telephone,
• Place the handset in the base so the CHARGE light turns on . The battery is typically fully charged in 16
charge the
battery provided
•
with this phone
(or equivalent) in
Replacing the handset battery
accordance with
1 . Remove the battery compartment cover on the handset by pressing on the indentation and sliding the
the instructions
and limitations
2 . Lift out the old battery and disconnect .
specified in this
user's manual
3 . Align the two holes in the new battery's plug with the socket pins, and snap the plug into place . Snap
(see page 5) .
4 . Replace the cover by sliding it up into place .
5 . The new battery must be charged before using the phone .
3
Operation
While in use (talking)
While not in use (standby*)
— A new battery is installed in the handset .
— The phone beeps twice every five seconds.
— The screen displays LOW BATTERY and the low battery icon .
hours .
You can keep the battery fully charged by returning the handset to the base after each use .
cover downward .
the battery in the compartment, as described in Installation,
on page 5 .
Place the handset in the base and allow it to charge for at least
16 hours the first charge. The telephone might operate before
that, but for best performance, let the battery charge fully .
www.vtechphones.com
Operating time
up to 8 hours
up to 4 days
Advertisement
Table of Contents
