VTech LS6217 User Manual page 7

Getting started
To attach the handset bracket
1. Choose the desired handset bracket.
2. Inset the small tabs in the slots on both
sides of the handset.
3. Hold both sides of the handset bracket to
make sure the small tabs are in the slots
on both sides of the handset.
4. Hold the right end of the handset bracket
and pull it down to lock the small tabs in
the slots on the right of the handset.
5. Press the right large tab in slot
6. Hold the left end of the handset bracket
and pull it down to lock the small tabs in
the slots on the left of the handset.
7. Press the left large tab in slot
8. See the section To install the battery
on page 7 to install the battery and the
battery compartment cover.
9. If you want to install a handset back
image card, after step 8, see the section
To remove the back image card on
page 11 to install the back image card
and the clear plastic cover.
.
.
3
Lock in the slot