Accessory handset for use with vtech models ds6211/ds6211-2/ds6211-3/ds6211-4/ds6221/ds6221-2/ ds6221-3/ds6221-4/ds6221-5/ ds6222-4/ds6222-5 (18 pages)
Table of contents 1. IMPORTANT SAFETY INSTRUCTIONS .......1 2. GETTING STARTED............2 2.1 Location................2 2.2 Setting up ................2 2.2.1 Connecting the charger ........2 2.2.2 Installing and charging the battery pack ....3 2.3 Set date and time ..............4 2.3.1 Set the time format ..........4 2.3.2 Set the date format ..........4 3.
12. Please note the correct polarity while inserting the battery pack. 13. Do not immerse battery pack in water, do not place in fire. If you have questions about this product, or having difficulty with setup or operation, call our VTech Electronics (HK) Ltd. Customer Service Centre Tel: 852-2776 3223...
GETTING STARTED Location The maximum range between the base station and the handset is approximately 300 meters. Depending on the surrounding conditions as well as spatial and structural factors, the range may be reduced. The range indoors is normally less than outdoors. Setting up 2.2.1 Connecting the charger...
2.2.2 Installing and charging the battery pack 1. Slide out the battery compartment cover. 2. Place the supplied battery pack as indicated. Locate the battery pack lead and connector and plug it into the socket inside the battery compartment (the red wire should be on the top). Tuck the battery pack leads in the space above the battery pack. 3.
2.3.2 Set the date format 1. Press when in idle mode to enter the feature menu. 2. Press to scroll to DATE FORMAT. 3. Press to select DD/MM/YY or MM/DD/YY. 4. Press to save. Your LS6205 is ready for use.
GETTING TO KNOW YOUR PHONE Overview of your handset 1. Earpiece 2. Menu/Select In idle/pre-dial/during a call mode: press to insert a "*". In phonebook entry view mode: press to view the In idle mode: press to access main menu. previous digits when the number is longer than a In menu/editing mode: press to confirm and save line to display.
Handset LCD display On when answering machine is turned on. On when new voicemail received from the local Off when answering machine is turned off. telephone provider. Off when there is not new voicemail. On when new answering machine message is received.
Charger Charger contacts Navigating the menus 1. Press 2. Press to scroll through the menu. 3. Press to open a sub-menu or validate an option. 4. Press to go back to previous menu level or cancel an action.
Menu map ANS. SYSTEM PLAY MESSAGE DEL ALL OLD DELETE ALL OLD MSGS? RECORD MEMO SETTINGS ANSWER ON/OFF ANSWER DELAY TOLL SAVER OGM SETTINGS RECORD PLAY REMOTE ACCESS REMOTE PIN OLD PIN NEW PIN MSG ALERT TONE PHONEBOOK REVIEW STORE ENTER NUMBER ENTER NAME CALL LOG...
Page 11
TONES KEY TONE BATTERY LOW OUT OF RANGE REGISTER HS SYSTEM PIN: DE-REGISTER HS SYSTEM PIN: HANDSET x DE-REGISTER? DIAL MODE TONE PULSE FLASH TIME SHORT MEDIUM LONG SET DATE/TIME SET DATE SET TIME TIME FORMAT 12-HR 24-HR DATE FORMAT DD/MM/YY MM/DD/YY CLR VOICEMAIL...
USING ADDITIONAL HANDSETS You can add new handsets to your telephone system, but each device must be registered with the telephone base before use. Register a handset 1. Press when in idle mode to enter the feature menu. 2. Press to select REGISTER HS.
Intercom Use the intercom feature for conversations between handsets. 1. Press on your handset when not in use. • If you have a two-handset system, your handset screen shows CALLING OTHER HANDSET. • If you have more than two handsets, your screen shows INTERCOM TO:. Use the dialing keys to select the other handset. Your handset screen shows CALLING HANDSET X.
Page 14
NOTES: • If you want to cancel an intercom call and reconnect to the outside call before the other handset answers, press on your originating handset. • If the other handset does not answer the intercom call within 100 seconds, is in the phonebook or call log, or is out of range, your originating handset screen shows UNABLE TO CALL TRY AGAIN and reconnects to the outside call automatically.
HELP My telephone does not work at all. • Make sure the battery pack is installed and charged correctly. For optimum daily performance, return the handset to the telephone base or charger after use. • Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch. •...
Page 16
The telephone does not ring when there is an incoming call. • Make sure the handset ringer volume is not set to the lowest level and the telephone base ringer volume is not set to zero. • Make sure the telephone line cord and power adapter are plugged in properly. •...
Page 17
The answering system might not detect the remote access code when your announcement is playing. Wait until the announcement is over before entering the code. • There might be interference on the telephone line you are using. Press the dial pad keys firmly when dialing. Customer helpline For technical support, please call VTech Technical Inquiry Hotline Tel: 852-2667 7433.
TECHNICAL SPECIFICATIONS Basic Information Dimensions Handset: 161x46x16mm Charger: 70x80x45mm Weight Handset: 106.1g Charger: 92.6g Power consumption Charger: 75mA Valid range Indoor: 50m Outdoor: 300m Handset Operating Time Standby time: 100 hours Talk time: 8 hours RF Parameter Transmission Power Handset: ≤ 250mV Frequency 1881.792MHz ~ 1897.344MHz Number of Channels...
Page 19
Customer Service Centre Suite 1601, Lever Tech Centre, 69-71 King Yip Street, Kwun Tong, Kowloon, Hong Kong. Customer Service Hotline: (852) 2666 5558 Technical Inquiry Hotline: (852) 2667 7433...
Need help?
Do you have a question about the LS6205 and is the answer not in the manual?
Questions and answers