Indications For Use; System Components - Integra A2012 Instruction Manual

EN – ENGLISH
ENGLISH

Indications for Use

The Integra® Brain Retractor System is indicated for retraction of brain tissue during
neurosurgical procedures. The Integra Brain Retractor may be used in conjunction with
MAYFIELD® Skull Clamps (REF #A1013, A1014, A1059, A1108, A1114, and A2000) or may attach
to the side rails of the operating room table.
The Integra Brain Retractor System also serves to support and position various instruments
and handrests.
Description
The Integra Brain Retractor System is a set of components that allows the surgeon to
construct a framework surrounding the operative site for the purposes of retracting tissue
during neurosurgical procedures. Included are a pair of Primary Bars, with clamps that
attach to the skull clamp after the sterile draping process. Longer Floating Secondary
Bars are then clamped to either the Primary Bars or to each other. Retractor Arms can
be attached to the Floating Secondary Bars and serve to support and position various
instruments, including the Retractor Blades of the Integra Brain Retractor System.
Suctioning devices, dissectors, scissors, drills, and handrests can also be attached.

System Components

The Integra Brain Retractor System includes the following components (Figure 1):
1. Primary Bars (quantity 2)
2. Floating Secondary Bars (quantity 4)
3. Retractor Arms (quantity 4)
4. Handrest
5. Pattie Tray
6. Tapered Retractor Blade, 1/4" to 3/4" (6.4 mm to 19.1 mm)
7. Tapered Retractor Blade, 5/32" to 5/8" (4.0 mm to 15.9 mm)
8. Tapered Retractor Blade, 1/8" to 1/2" (3.2 mm to 12.7 mm)
9. Tapered Retractor Blade, 3/32" to 3/8" (2.4 mm to 9.5 mm)
10. Tapered Retractor Blade, 1/16" to 1/4" (1.6 mm to 6.4 mm)
11. Sterilization Case (not shown)
5