Test The Data Port; Name The New Connection; Set The Com Properties - Culligan G1 Series Installation, Operation And Service Instructions

The following data cable styles are available from Culligan (cables for Modbus, BACNET, and Profibus are also available
from your Culligan dealer):
Cable Part No.
01021507
01021508
01021509

Test the Data Port

Once your cables are set up, you can test your connection using the Windows
generally found under Start/All Programs/Accessories/Communications/Hyperterminal.

Name the New Connection

1. When you open Hyperterminal you will be prompted to create a
name for the connection. Enter any name.
2. Click on an icon that represents your connection.
3. Click on the OK button.

Set the COM Properties

1. Select a COM port. From the "Connect Using" drop down list, pick
the COM port with the highest number and click OK.
2. Now set the properties for this COM port as shown.
3. Click OK. The Hyperterminal is ready to accept data.
Culligan® Series G1 Reverse Osmosis
130
USB style output cable—comes with CD-ROM which includes device drivers for Microsoft
Windows 2000, XP, Vista, and 7 operating systems
®
9-pin female RS-232 output
9-pin female RS-485 output
Description
Hyperterminal program. This program is
®
130
®
Cat. No. 01021713