Alternating Ro Unit Settings - Culligan G1 Series Installation, Operation And Service Instructions

Alternating RO Unit Settings

RUNNING
JAN-01-12 12:01P
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2) LANGUAGE
3) POWERON MODE
4) FLUSH MODES
>5) ACCESSORIES
5) PRESS GAUGES
6) TDS
7) RELAY MODE
>8) MULT UNIT RO
Screen Display
MULTI UNIT RO
SINGLE
MUL UNIT RO ROLE
MASTER
Culligan® Series G1 Reverse Osmosis
56
1. From the default home screen, press
2. Press to scroll to 4) SETUP.
3. Press to select the SETUP menu.
4. Press
cessories menu.
5. Press
plays the multiple unit RO settings.
Range
Press
Single
configuration.
Two Pass RO
Alternating
For Two-Pass configuration, refer to the Series G1 RO Two-Pass
Kit manual (P/N 01026027).
If you select Alternating, press
Master
MASTER if the selected RO will control the functions of the entire
RO system. Select SLAVE if the selected RO will be controlled by
Slave
the master RO.
NOTE
. The screen displays the main menu.
to select 5)ACCESSORIES. The screen displays the ac-
to select 8)MULT UNIT RO. The screen dis-
Changing the Setting
or and then to select the RO system
The Master RO must be set up first.
or and then to select
Cat. No. 01021713
56