Other First Time Setup Settings; Completed First Time Setup - Culligan G1 Series Installation, Operation And Service Instructions

Other First Time Setup Settings

Screen Display
SET
1
DAY
SET YEAR
2012
CLOCK TYPE
12 HR
SET HOUR
12PM
SET
25
MINUTES
POWERON MODE
OFFLINE
SYSTEM UNITS
US INCH

Completed First Time Setup

STARTING
JAN-01-12 12:01P
RUNNING
JAN-01-12 12:01P
Cat. No. 01021713
Range
1. The screen displays the day setting. Press
1–31
then
2. The screen displays the year setting. Press
2010–2040
then
3. The screen displays the clock type setting. Press
12 or 24
4. The screen displays the hour setting. Press
12AM–11PM
then
5. The screen displays the minutes setting. Press
0–59
and then
6. The screen displays the selected status of the RO when pow-
Running
ered on. Press
Offline
ue and see the next setting.
7. The screen displays the units of measure setting. Press
US INCH
METRIC
first-time setup.
NOTE
1. When the setup is complete, the circuit board microprocessor automatically calcu-
lates the water conditioner capacity. The screen displays the initializing status and
the current date and time, and then transitions to the home screen.
2. The screen displays the current state of the RO system (RUNNING or OFFLINE)
and the date/time set for the unit. This is the default home screen.
Procedure
to change the value and see the next setting.
to change the value and see the next setting.
and then to change the value and see the next setting.
to change the value and see the next setting.
to change the value and see the next setting.
or and then
or and then to change the value and complete the
This setting does not automatically change to metric
if you select a language other than English.
or and
or and
or
or and
or
to change the val-
First Time Setup 21