Headwall NANO-HYPERSPEC Installation And Operation Manual page 39

a. Click on Hardware and then Disk Test, to open the following configuration window.
(1) To perform the Disk Test, accept the defaults, or modify the values if needed, and click Start.
b. Click Hardware and TCPIP Client to open the following dialog window.
(1) Enter the Host URL into the top line, accept the default port number and click Open.
c. Click Hardware and then TCPIP Server to open the following dialog window.
(1) Select or enter the TCPIP Port and then click Start to begin operating the Server. It is suggested to accept the
default port unless there is a conflict.
Figure 3-8. Hardware Options.
Figure 3-9. Disk Test Window.
Figure 3-10. TCPIP Client Configuration.
Figure 3-11. TCP Server Configuration.
®
HYPERSPEC III CONFIGURATION / NANO
3-37