Pixci(R) Driver - Headwall NANO-HYPERSPEC Installation And Operation Manual

®
HYPERSPEC III INSTALLATION
(11) The Ready to Install window opens. Click Back to make adjustments, or click Next to continue the installation.
When Next is clicked, the Setup progress window opens, shown below. This window will remain open during the entire
®
Hyperspec III installation, which my include multiple installation and progress windows. If necessary, left-click and
drag the window to the side of the desktop, to perform other installation steps, as needed.
Do not close the Hyperspec
stops the installation process.

2.3.1 PIXCI(R) Driver.

(1) The frame grabber software, PIXCI(R) Driver, shown below, is the next component to be installed. The installer
automatically opens after the Hyperspec
2-16
Figure 2-12. Select Components to Install.
CAUTION
®
III installation progress window. Closing the window
®
Figure 2-13. Hyperspec
®
III progress window opens. Click Install when the window opens.
III Installation Progress Window.