Hyperspec ® Iii Configuration; Hardware Configuration - Headwall NANO-HYPERSPEC Installation And Operation Manual

®
HYPERSPEC III CONFIGURATION / NANO
®
3.2 HYPERSPEC III CONFIGURATION
Use the following steps to configure Hyperspec
a. Double-click the Hyperspec
b. The application opens, as shown below.
The main window shows three sections: the Button Dock, the Log Dock and the Image Viewing Area. The Button Dock
and Log Dock are toggled using the View menu option along the top of the window. The Button Dock is used to configure
and operate of the Hyperspec
Dock shows the real time performance and possible software errors or configuration errors while operating or during the
configuration process.
®
The Hyperspec III has two menu options, displayed in the top left corner of the application: Hardware and View.

3.2.1 Hardware Configuration.

The Hardware menu option is used to test and configure the hardware connections used by Hyperspec
following image shows the Hardware options.
3-36
®
III.
®
III icon on the desktop.
Figure 3-6. Hyperspec
Figure 3-7. Hyperspec
®
III software. The buttons correspond to the functionality of the selected sensor. The Log
®
III Icon.
®
III Main Window.
®
III. The