Headwall NANO-HYPERSPEC Installation And Operation Manual page 17

(5) Using Windows Explorer, navigate to the folder that matches the Headwall device number. Double click the
folder to open and locate the installer. The folder contents should be similar to those in the following image.
(6) Double click the file, headwall-xxxxxx-windows-installer application.
(7) When the installer Setup wizard opens, click Next.
(8) When the license agreement opens, read the agreement, select "I agree..." and click Next.
(9) The Installation Directory window opens, as shown below. Accept the default installation directory, and click,
Next.
(10) The Setup, Select Components window opens, as shown below.
(a) For Nano installation, select the Headwall GPS Xsens check-box, then click Next.
(b) For Headwall devices other than Nano, click the check-boxes that correspond to the system defined products
and software, then click, Next.
The following figure shows all options selected. For this manual this will be used to
illustrate installing all options. The user can ignore the sections for options that were
not selected.
Figure 2-10. Installer Directory.
Figure 2-11. Installation Directory.
NOTE
®
HYPERSPEC III INSTALLATION
2-15