Packing The Instrument In The Original Packaging Materials; Packing The Instrument In Commercially Available Packaging Materials - Keysight Technologies 53147A Service Manual

2 Service

Packing the Instrument in the Original Packaging Materials

To prevent shipping damage, it is best to repack the instrument in its original
packaging. In any correspondence, refer to the instrument by the model number
and the complete serial number.
1 Disconnect the power cord, probes, cables, or other accessories attached to
2 Make sure the folded corrugated spacer (which normally contains the
3 Make sure one of the polystyrene blocks is in its proper position in the box.
4 Place the instrument, front panel end first, on the polystyrene block.
5 Place the other polystyrene block on top of the rear end of the instrument to
6 Do not return the manuals with the instrument. Return an accessory only when
7 Seal the shipping container securely.
Packing the Instrument in Commercially Available Packaging
Materials
If the original factory packaging materials are not available, use the following
procedure to pack the instrument in commercially available shipping materials.
1 Wrap the instrument in heavy paper or plastic.
2 Place the instrument in a strong shipping container. Use a double-walled
3 Protect the control panel with cardboard.
4 Add a layer of shock-absorbing material that is 3 to 4 inches (70 to 100 mm)
5 Seal the shipping container securely.
6 Mark the shipping container FRAGILE.
58
the instrument.
manuals) is in the box to ensure proper fitting.
secure it.
it is a part of the failure symptoms.
carton made of at least 350 lb. test material.
thick around all sides of the instrument cushion it and to prevent it from
moving within the container
Keysight 53147A/148A/149A Assembly Level Service Guide