70 Series Mobile Computer User's Manual
Predefined Mode
Custom
3 Point the imager window at the bar code label, and hold the
computer steady a few inches from the label.
4 Press the Scan button. The laser pointer and illumination beam or
frame appear.
Scanning With the EA30 Imager
5 Use the laser pointer as a guide and aim toward the middle of the
bar code. Make sure that the illumination beam or frame covers the
bar code you are trying to decode.
When the computer successfully reads a bar code label, you hear a
high beep, and the Good Read LED turns on briefly.
6 Release the Scan button.
Chapter 1 — Using the Computer
For Scanning
In conditions that require customized
settings. For complete information about
these settings, commands, and
parameters, see the
Intermec Settings Command Reference
Manual.
25