Figure 44. Removing a SFF disk drive module (1 of 2)
2
Gently move the drive carrier module outward from the drive slot.
Figure 45. Removing a SFF disk drive module (2 of 2)
3
Remove the module fully from the drive slot.
CAUTION:
To ensure optimal cooling throughout the 2U enclosure, blank drive carrier modules must be fitted to all
unused drive slots.
Installing a SFF drive carrier module
1
Release the carrier handle by pressing the latch in the handle downwards, and opening the hinged handle as shown in
drive carrier module in open
NOTE:
Make sure the carrier is positioned such that the disk is on its left side and the handle opens from the top.
position. Insert the carrier into the enclosure in a vertical position.
Figure 46. SFF
Module removal and replacement
57