Installing The M.2 Ssd Module - Dell EMC BOSS-S1 User Manual

Installing the M.2 SSD module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Align the M.2 SSD module connectors with the connectors on the card.
2 Tilt the M.2 SSD module downwards until the module is seated firmly on the card.
3 Tighten the screw that secures the M.2 SSD module on the card.
Figure 7. Installing the M.2 SSD module
1 module connector (2)
14 Deploying the BOSS card
2 modules (2)