Task 2: Configuring IP and Ethernet
interfaces
Task 2: Configuring IP and Ethernet interfaces
This task consists of the following procedures:
Configuring the AP IP
Configuring the AP IP interface
The IP interface allows users to connect to the PMP 450 web interface, either from a locally connected
computer or from a management network.
To configure the Ethernet link to run at a fixed speed and duplex, leave Ethernet Auto Negotiation set to
‗Enabled' and set Auto Neg Advertisement to the required speed.
2-6
Chapter 2: Configuration and alignment
interface on page
2-6
pmp-0050 (May 2012)