Task 8: Configuring syslog
Task 8: Configuring syslog
This task is only performed when system logging is required. Both the AP and the SM may be configured to
send system messages to a syslog server. An example of a syslog message that would be sent from a radio is as
follows:
<6>1 2011-05-13T12:28:31Z 169.245.1.1 - - - - BOM******System Startup******
By default syslog is disabled on all devices.
Configuring AP system logging (syslog)
To configure system logging, select menu option Configuration, Syslog. The Syslog Configuration page is
displayed
(Figure
Figure 16 AP Syslog Configuration page
2-100
16).
Chapter 2: Configuration and alignment
pmp-0050 (May 2012)