Mounting And Wiring - BEA LZR-WIDESCAN Manual

Motion, presence, and safety sensor for industrial doors

Hide thumbs Also See for LZR-WIDESCAN:

MOUNTING & WIRING

Mounting height: as high as possible (max. 19'6").

The size of the detection field depends on the

mounting height.

Mounting position: center of door or left corner.

Mounting on the right side of the door should be

avoided.

Verify that the angle lock screw is positioned as indi-

cated. Unscrew slightly if necessary.

Position the sensor horizontally (as shown) and

secure the sensor to the mounting bracket.

COM

*output status powered during non-detection with factory values

Connect the wires accordingly.

The output functions can be configured if necessary (see page 10).

Page 6 of 16

POWER

OUTPUT 1

OUTPUT 2

RELAY

TEST

Remove the mounting bracket from the sensor and

secure it to the wall. You can also install the sensor

directly without using the mounting bracket.

Plug in the connector and pass the cable (PN 20.5399)

through the cable passage without making a loop.

Teach-in reminder

Push OK to return to

detection display.

75.5916.03 LZR-WIDESCAN 20180821

INSTALL

Table of Contents