BEA LZR-WIDESCAN Manual page 11

OPTIONAL REMOTE CONTROL SETTINGS (cont.)
When programming each of the parameters listed below (function,
logic, holdtime), you must always enter 3 digits for the given parameter
(output 1, output 2, relay).
1st digit = Output 1
2nd digit = Output 2
3rd digit = Relay
If you do not want to change the setting of an output, select 0.
First, assign the outputs.
Out 1 Function*
Out 2 Function*
Relay Function*
Next, determine the desired states and hold times for each output chosen above.
Out 1 Logic**
Out 2 Logic**
Relay Logic**
Out 1 Holdtime
Out 2 Holdtime
Relay Holdtime
...
MOTION
Direction
75.5916.03 LZR-WIDESCAN 20180821 75.5916.03 LZR-WIDESCAN 20180821 75.5916.03 LZR-WIDESCAN 20180821 75.5916.03 LZR-WIDESCAN 20180821
motion or
no change motion
pull-cord
motion or
no change motion
pull-cord
motion or
no change motion
pull-cord
passive active
100 ms 1 s
100 ms 1 s
100 ms 1 s
UNI 100%
ANY
DEFAULT
1 ANY
2 UNI 100% (default)
6 UNI REV
7 UNI 100% +
9 UNIDIRECTIONAL
presence safety
presence safety
presence safety
NO NC
NO NC
3 s 5 s 10 s
3 s 5 s 10 s
3 s 5 s 10 s
UNI REV
detection in any direction
unidirectional detection (approaching within the width of
the max. field)
unidirectional detection reverse (going away)
unidirectional detection (approaching within the width of
max. field + 1 m of bidirectional detection in front of door)
unidirectional detection (approaching in any direction;
distance between object and sensor decreases)
FOR EXAMPLE, if you want the
outputs to be Motion (Output 1), Pull-
Cord (Output 2), and Safety (relay),
you must push the following buttons
in the following order:
motion + motion +
pull-cord
speed height
motion + presence
pull-cord
speed + height
motion + motion +
pull-cord
speed height
** Output status during non-detection.
30 s 1 min 5 min
30 s 1 min 5 min
30 s 1 min 5 min
UNI 100%+
motion motion
pull-cord pull-cord
safety presence
motion motion
pull-cord pull-cord
safety presence
motion motion
pull-cord pull-cord
safety presence
10 min 20 min
10 min 20 min
10 min 20 min
UNIDIRECTIONAL
Page 11 of 16 Page 11 of 16 Page 11 of 16 Page 11 of 16