1
1
Mounting the sensor
Mount the sensor at a maximum height of 5 cm from the bottom line of
the door controller.
2
1
Wiring the sensor
(Note:check that the door operator is compatible with this value)
3
1
Width of radar motion sensing field: choice of antenna
Sensitivity = 9
4
1
Depth of radar motion sensing field: tilt angle of radar-module
Sensitivity = 9
ACTIV8 THREE PULSE
R1 ≤ 470Ω
Sensitivity = 9
Sensitivity = 9
Use the mounting template to drill holes and position the sensor.
To ensure waterproof installation, place the cable as shown above.
Touching the antenna patches will not
cause any damage!
2/8