BEA LZR-WIDESCAN Manual page 7

Motion, presence, and safety sensor for industrial doors

Hide thumbs Also See for LZR-WIDESCAN:

POSITIONING OF DETECTION FIELD

Remove the blue protection film from the laser window.

Activate the 2 visible laser spots by pressing

control.

Make sure the curtain is parallel to the door by adjusting one or both screws on the side.

Position the curtain closer to or farther away from the door by turning the screw at the top.

Launch the POSITION WIZARD to position the detection field correctly in front of the door.

LONG

1. Push and hold OK to launch the POSITION WIZARD.

2. Rotate the sensor in order to align the center of the red spots with the center of the door. Push OK.

3. Rotate the sensor until the LCD screen validates the position. Push OK to exit.

Lock the sensor position by tightening the angle lock screw (see page 4).

75.5916.03 LZR-WIDESCAN 20180821

twice or pressing

AWAY

CLOSER

on the remote

When the safety

function is required,

the red spots should be

as close to the door as

possible.

Negative angles reduce

the depth of the

detection fields.

Page 7 of 16

Table of Contents