Setting The Track; Quick Search; Repeat Function - TechniSat Digitradio 361 CD IR User Manual

13.4 Setting the track

> If required, select the categorisation or folder and the subfolder it contains until you reach the track you
want in order to play it.
> Folders/Albums can be selected with the FOLDER- or FOLDER+ (10, 28) buttons.
> You can use the TUNING r/8: and TUNING s/97(9, 10) buttons on the device, or the 97 or 8:
buttons on the remote control (14, 32), to skip to the next or previous track respectively.
The display (4) shows the set track number.

13.5 Quick search

While the track is playing, you can perform a quick search forwards or backwards to find a specific section. There
is no playback during the search process.
> Hold down the TUNING s/97 or TUNING r/8: on the device (9, 10) or the 97 or 8: buttons on
the remote control (14, 32), to perform a quick forwards and backwards search while the track is playing
for as long as the buttons are kept pressed.

13.6 Repeat function

You can select whether a track, the entire folder/album (only for MP3 CDs) or all of the tracks on the CD are to
be repeated.
> To do so press the REPEAT button on your remote control (3) repeatedly. The selected mode is shown on
the display (4)
> To switch the function off again, press the REPEAT button as often as required until the repeat display is
no longer shown.
48
(Rep. track, Rep. folder/album, Rep. all).