Playing Music (Upnp & Usb Media); Playing Audio Files - TechniSat Digitradio 361 CD IR User Manual

7 Playing music (UPnP & USB media)
It is possible to play audio files stored on a UPnP server or USB data medium via the DIGITRADIO.
For playback from a UPnP server, a network connection is required in the same network where the desired
UPnP server is located, or the USB data medium to be used for playback must be connected to the USB
connection.
The device does not support the connection of USB media (hubs, etc.) via a USB extension cable.
Not suitable for direct connection to PCs.
Please observe the instructions in Section 15.2 for setting up a LAN/WLAN connection.
> As described in Section 5.2, select the Play music source.

7.1 Playing audio files

> Select Shared media for UPnP playback, or USB playback to play from a USB data storage device.
The look of the Categorisation/folder depends on the structure on your media server or USB medium. As
such, take note of the information on the display (4).
> If required, select the categorisation or folder and the subfolder it contains until you reach the track you
want in order to play it.
> By pressing the 4/;Play/Pause button on the remote control (31) or on the device (3), you can pause
playback, or press it again to continue.
> You can use the 8: Forward or97 Back buttons on the remote control (14, 32) or on the device (9, 10)
to skip to the next or previous track respectively.
> Keep the 8: Forward or 97Back buttons pressed to quickly skip forward or back during a track for as
long as the button is pressed.
34