TechniSat Digitradio 361 CD IR User Manual page 62

Note that, for unrestricted, smooth multi-room mode and operation via the MyDigitRadio Pro app, this
function must remain switched on.*
> Then select your WLAN network or [Cable], if you have connected the radio via LAN cable to your
network.
If you select your WLAN network, you can now select whether you wish to use the WPS function or enter
your WLAN password manually.
> If you would like to use the WPS function, launch it on your router as per its instruction manual and then
select Press button in the network wizard.
> If you wish to enter your WLAN password manually, or if your router does not support the WPS function,
select Skip WPS.
> Enter your WLAN password using the r/sPRESET, VOL+, VOL- and ENTER buttons on the remote control
(7, 9, 8, 26, 27) or by rotating and pressing the SELECT/VOLUME knob on the device (5) and confirm with
OK.
> If the display (4) shows Set-up wizard closed, press the ENTER button on the remote control (27) or the
SELECT/VOLUME knob on the device (5).
*DIGITRADIO 360 CD IR only
15.7.1 Info
> In MENU > Main menu > System settings > Info you can display the SW version currently installed in the
device as well as, for example, the Spotify version*.
*DIGITRADIO 360 CD IR only
62