Main Menu; Source Selection - TechniSat Digitradio 361 CD IR User Manual

After approx. 20 seconds without operation, the menu is exited automatically.
> The highlight is moved by turning the SELECT/VOLUME knob (5) on the device or by pressing the r/s
PRESET or VOL-/VOL+ buttons on the remote control (7, 9, 8, 26).
> You can confirm the respectively highlighted item by pressing the ENTER button on the remote control
(27) or the SELECT/VOLUME knob (5) on the device to open or select it.
> By pressing the BACK button (23) on the remote control, you can go one step back or reach the
respective superordinate menu.
A * highlights the current selection/setting.

5.1 Main menu

The main menu takes you to all the functions and settings for the DIGITRADIO 360/361 CD IR.
> Open the menu by pressing the MENU button on the remote control(4) or by holding it down (approx. 2
seconds) on the device (6).
If you are currently in a playback source, you can use the MENU button to retrieve the menu for this
source.
> Highlight the Main menu item and confirm with the ENTER button to switch to the main menu.

5.2 Source selection

> Press the MODE button (2) on the device as often as required until the desired source is shown on the
display (4) or press the CD/USB (11), FM/DAB (12), AUDIO IN (30) or INTERNET (29) buttons on the
remote control to select the sources directly.
Alternatively:
> Press the MENU button.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
31