Cleaning The Reflector - ETC Source Four JR User Manual

Hide thumbs Also See for Source Four JR:

Table of Contents

English

C l e a n i n g t h e r e f l e c t o r

W A R N I N G :

To quickly clean the reflector, and. You may also wipe the reflector with a clean lint-free cloth. If

either method is not sufficient, follow these steps.

Step 1:

To protect the lamp housing during cleaning, remove the lamp housing by loosening the

knurled bolt and pulling the housing straight out. See

Step 2:

Remove the lens. See Source Four jr / jr Zoom Assembly Guide for full fixture

disassembly/assembly instructions.

Step 3:

Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. Isopropyl

alcohol, distilled water or a 50%-50% mixture of each can be used to clean the glass

surface.

Step 4:

Reinstall the lamp housing and tighten the knurled bolt.

Step 5:

Reinstall the lens.

Unplug the fixture before attempting to clean the reflector.

Do not use ammonia-based or other harsh commercial cleaners. Clean

reflector only as directed.

Commercially available glass cleaning agents should be avoided as they

may contain ammonia, other harsh chemical detergents or abrasive agents.

These cleaners may damage the glass surface and the Anti-Reflective

coatings. Do not immerse or soak the glass in any cleaning solution.

Figure

Source Four jr/jr Zoom CE User Manual

Table of Contents

Source four jr zoom