Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ETC Source Four PARN
Summary of Contents for ETC Source Four PARN
- Page 1 Source Four PAR Nel Assembly Guide...
-
Page 2: Table Of Contents
Table of Contents Final Assembly ................ 3 Lamp Burner Assembly............4-5 Housing Assembly ..............6-7 Installing a stippled/wave lens ..........7 Positioning the stippled/wave lens .......... 7 Cleaning the reflector.............. 8 Source Four PARNel Assembly Guide... -
Page 3: Final Assembly
Figure 1 Final Assembly Reference Part Description Quantity Number Number Required 7061A2020 S4 PAR zoom base assembly, black 7061A2020-1 S4 PAR zoom base assembly, white 7061A2001 Lamp socket assembly, black 7061A2001-1 Lamp socket assembly, white 7061A3006 Yoke bracket, black 7061A3006-1 Yoke bracket, white 7061A4010-2 PAR zoom clear/wave lens... -
Page 4: Lamp Burner Assembly
Figure 2 Lamp Burner Assembly Reference Part Description Quantity Number Number Required 7061A3023 Burner, casting, black 7061A3024 Strain relief, casting, black W330-02 TP22 CLCM assembly, ceramic W330-03 TP22 CLCM assembly, mica W330-01 TP22 CLCM assembly, 44” 16-AWG. 1/4” semi-stripped, silver contacts, 250º... - Page 5 Lamp Burner Assembly Tools required: Phillips screwdriver Install the ground wire (7) and the two TP22 white leads (5) in the sleeving (12). 2. Snap the focus handle (13) onto the burner (1). (Figure 2) 3. Place the TP22 mica (4) in the burner casting (1), as shown in figure 3. 4.
-
Page 6: Housing Assembly
Rear lens track Figure 4 Housing Assembly Reference Number Part Number Description Quantity Required 7061A3005 Gel retainer clip 7061A3013 Spring clip rotator 7061A3014 Reflector, painted black 7061A3014-1 Reflector, painted white 7061A3025 Barrel, painted black 7061A3025-1 Barrel, painted white 70612019 Source Four PAR rivet assembly, black 70612019 Source Four PAR rivet assembly, white 70613029... -
Page 7: Installing A Stippled/Wave Lens
Housing Assembly Tools required: Phillips screwdriver. Install the reflector mount silicon pads (11) and lens pad (15) in the left barrel (7 or 8). 2. With the wave side of the lens facing toward the front of the fixture, install the wave/clear lens (21) into the rear lens track. -
Page 8: Cleaning The Reflector
Cleaning the reflector Warning : Do not use glass and window cleaners on the reflector. Chemicals in these cleaners will harm the reflective coating. Do not use paper towels or harsh materials to wipe the reflector. These materials can scratch the surface of the reflector.
Need help?
Do you have a question about the Source Four PARN and is the answer not in the manual?
Questions and answers