Clearing Power Demand Meter Value; Display And Backlight; Selection Of Screens To Be Displayed; Selection Of Start Page - Circutor CVM-MINI SERIES Instruction Manual

4.1.3.3

Clearing power demand meter value

To clear or save maximum demand, press the
alternate. Once the required option is selected, press the
data and access the next setting step.
Cl r
p d
n o
Figure 41. No-clearing power demand meter value

4.1.4 Display and backlight

4.1.4.1 Selection of screens to be displayed

Due to the fact that the CVM-MINI power analyzer has a large number of
default screens (as shown in section 3.2.1 Default display), the user has the
option of setting a personalised display by selecting screens to be displayed.
The display shows as default "def page yes"; the
proceed to the personalised display option. The analyzer will show "def page
no" on the screen; to enter the data and proceed to this setting, press
Once the personalisation option has been entered, by using
screens shown in section 3.2.1 Default display will be displayed in turn. By
using the button, the screen to be displayed is selected. Select "yes" or
max
"no" respectively.

4.1.4.2 Selection of start page

In order to select the equipment's preferred start up screen, repeatedly press
the key up to display the screen to be selected. Once the required option
max
is selected, press the
step.
Rotating function: Using the rotating display function, the Power analyzer
automatically displays every available screen for five seconds each.
The must be used to enter the rotating display function when all electrical
parameters are flashing at the same time.
max
Figure 42. Clearing power demand meter value
key to enter the data and access the next setting
s e t
L1
i n i t
L2
V
p a g e
L3
Figure 43. Select preferred page
Page 14 of 26
key and the two options will
key to enter the
Cl r
p d
y e s
key has to be pressed to
max
.
key the