Silent Mode; Switching On Silent Mode; Switching Off Silent Mode; Locating A Handset - Yealink W60P User Manual

Yealink W53P & W60P User Guide

Silent Mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving an incom-
ing call, but the phone will still display the incoming call information.
Topics

Switching on Silent Mode

Switching off Silent Mode

Switching on Silent Mode
Procedure
1. Long press the * key until the phone prompts "All Ring Tones Off".
The silent icon appears in the status bar.
Note
When the silent mode is activated, the phone will not play any advisory tones.
Related Topic
Setting the Advisory Tone
Switching off Silent Mode
Procedure
1. Long press the * key until the phone prompts "All Ring Tones On".

Locating a Handset

You can locate a misplaced registered handset using the base station.
Before You Begin
Make sure the handsets are in idle state.
Procedure
1. Press on the base station.
All the handsets that are registered to this base station will ring (paging) simultaneously and the IP address of the
base station on the phone screen will be displayed.
You can press any key on one of the handsets or press

Renaming the Handset

The handset will be named automatically if successfully registered to the base station. You can personalize the handset
name.
Procedure
1. Press OK->Settings->Handset Name.
2. Edit the current name in the Rename field.
32
again on the base station to stop ringing (paging).