Call Features; Switching Among The Receiver, Handsfree And Headset Modes; Changing The Default Outgoing Line; Placing Calls - Yealink W60P User Manual

Call Features

You can place a call, answer a call, transfer a call, etc. on Yealink IP phone.
Topics

Switching Among the Receiver, Handsfree and Headset Modes

Changing the Default Outgoing Line

Placing Calls

Answering Calls
Silencing or Rejecting Incoming Calls
Ending Calls
Muting/Unmuting Audio
Call Hold
Do Not Disturb (DND)
Call Forward
Transferring Calls
Conference Calls
Multicast Paging
Switching Among the Receiver, Handsfree and Headset
Modes
You can place a call using the following call modes:
Receiver mode—pressing the Off-hook key to dial out.
l
Earpiece mode—pressing the Speakerphone key to dial out.
l
Headset mode—connecting a standard 3.5mm headset.
l
Changing the Default Outgoing Line
Your system administrator can assign one or more outgoing lines for the handset. Only the outgoing line(s) assigned
by your system administrator can be used to place calls.
When multiple outgoing lines are assigned to the handset, the first one will be the default outgoing line. You can
change the default outgoing line of the handset.
Procedure
1. Navigate to OK->Settings->Telephony->Default Line.
The phone displays all the assigned outgoing lines. The default outgoing line is highlighted and followed by a left
arrow.
2. Highlight the desired line, and then press OK.
The default outgoing line is changed successfully.
Placing Calls
When the handset is registered to the base station successfully, you can use your handset to place an internal or
external call. One handset can handle a maximum of 2 calls at one time, and one call is active (the call that has audio
associated with it), while the other is placed on hold.
By default, the phone uses the default outgoing line to place a call.
Call Features
45