Entering Characters On The Handset; Setting The Input Modes; Editing Fields; Entering Data - Yealink W60P User Manual

Yealink W53P & W60P User Guide

Entering Characters on the Handset

You can enter and edit data in the corresponding field using the handset keypad. The input modes are selectable.
Topics

Setting the Input Modes

Editing Fields

Entering Data

Setting the Input Modes
The handset provides you with 12 input modes, and different input mode provides different characters.
The default input modes are Abc, 123, ABC and abc. You can enable the input modes that you used frequently and
switch among them if needed.
Procedure
1. Navigate to OK->Settings->Display->Input Method.
2. Select a desired input mode, and then press Change.
Editing Fields
The limitations for some certain fields on the handset are as follow:
Name and Password field: any characters
l
Number field: only digit, dot or #
l
IP address field: 32-bit IPv4 address or 128-bit IPv6 address
l
Entering Data
In corresponding input mode, you can press the keypad repeatedly to view the character (or numbers) options and
press more times to highlight the desired character (or number), the available character under each key are displayed at
the left bottom of the phone screen.
The following table describes how to enter different characters using the keypad keys:
If you want to
Press
Switch among
input modes.
The current input mode is displayed at the right bottom of the phone screen.
Press a key one or more times (depending on what input mode you're in) to enter the possible char-
Enter letters
acters that are displayed on the keypad key.
Press
% & @ ? ! ¿ ¡ ( ) { } [ ] < > ¥ $ ￡ | ~ ¤
Press
Enter special
If it is in the uppercase (ABC), uppercase and lowercase (Abc) or lowercase (abc) input modes, it
characters.
l
will provide space character and the following special characters: . , ?, !, 0.
If it is in the numeric (123) input mode, it will only provide the digit 0.
l
Long press the key to enter the character +.
l
Press
Delete the text.
delete one character at a time or long press to delete all characters.
22
to switch among input modes.
to enter the space character or the following special characters: _' " = / \ ^ ; : . , - + * # §
:
or to position the cursor to the right of the text you want to delete, and then press Del to
Then you can