Fujitsu ETERNUS DX S4 Series Configuration Manual page 32

Chapter 11 Creating the Volumes
11.2 Creating the Logical Volumes
7
Check that the [BB POLICY:] parameter is shown as "non-relocatable".
If not, re-execute the "smit" command and try again.
LOGICAL VOLUME:
LV IDENTIFIER:
VG STATE:
TYPE:
MAX LPs:
COPIES:
LPs:
STALE PPs:
INTER-POLICY:
INTRA-POLICY:
MOUNT POINT:
MIRROR WRITE CONSISTENCY: on
EACH LP COPY ON A SEPARATE PV ?: yes
Execute this command for all logical volumes created on ETERNUS DX/AF storage systems' LUNs to
disable [Bad Block Relocation].
If [Redistribution of bad blocks] is not disabled, file system may be damaged.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
raid_lv6
000972ca57abbe2b.l
active/complete
jfs
512
1
500
0
minimum
middle
/mnt/raid_lv6
32
Copyright 2018 FUJITSU LIMITED
VOLUME GROUP: raid_vg6
PERMISSION: read/write
LV STATE: opened/syncd
WRITE VERIFY: off
PP SIZE: 4 megabyte(s)
SCHED POLICY: parallel
PPs: 500
BB POLICY: non-relocatable
RELOCATABLE: yes
UPPER BOUND: 32
LABEL: /mnt/raid_lv6
P3AM-3782-23ENZ0