Table of Contents
Advertisement
10.18
Application "2-button step switch"
NOTE
The application is valid for the following parts of the device:
■
■
The application "2-button step-type switch" facilitates step-type switching. This means that the
user can trigger different switching processes with each new actuation of the button.
For example:
First operation switches lamp 1 on.
■
Second operation switches lamp 1 off and lamp 2 on.
■
The third actuation switches lamp 2 off and lamp 3 on.
■
The fourth actuation switches lamp 3 off and lamp 1 on.
■
etc.
■
Up to five switching levels can be activated.
In each case, the "2-button step switch" application makes a separate set of parameters and
communication objects available for the right or left side of the button. The application enables
realising switching functions via one button side while the other button side can be assigned
with an additional "button-orientated" function.
10.18.1 General parameters - Number of objects
Options:
The application can switch up to five levels. For every level, its own 1-bit communication object
is available. The number of the levels is specified via the "Number of objects" parameter.
10.18.2 General parameters - Evaluation period
Options:
The application can differentiate between a single, double, triple, quadruple or quintuple
operation of the button.
If the button is to recognise a multiple operation, then the button must be operated multiple
times in a relatively short period of time. The period during which the button evaluates a multiple
operation is started anew after each operation.
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
Button 1 / rocker 1
Button 3 / rocker 2
1 ... 5
01.000 ... 05.000
Application "2-button step switch"
│70
Advertisement
Table of Contents
