Table of Contents
Advertisement
10.7.2
Extended parameters - Reaction on rising edge
Options:
The application can differentiate between the operation and the releasing of the button. An
operation is designated as "Rising edge" and the releasing is designated as "Falling edge".
The application "1-button value transmitter" makes two separate "Switching" communication
objects available for the left or right side of the button. The value 1 is always sent out on the first
object (Value 1) and the value 2 is always sent out on the second object (Value 2).
The "Reaction to falling edge" parameter specifies whether the "Value 1 for falling edge" or the
"Value 2 for falling edge" is sent out for falling edge.
Alternatively, Value1/Value2 can also be alternatingly set for a rising edge, i.e. after Value 1
was sent (or received), a renewed operation will send out Value 2. After it is operated again,
Value 1 is again sent out.
The values 1 and 2 are specified via the parameters "Value 1" and "Value 2".
The "No reaction" setting causes no telegram to be sent out for a operation of the button.
10.7.3
Extended parameters - Reaction on rising edge
Options:
The application can differentiate between the operation and the releasing of the button. An
operation is designated as "Rising edge" and the releasing is designated as "Falling edge".
The application "1-button value transmitter" makes two separate "Switching" communication
objects available for the left or right side of the button. The value 1 is always sent out on the first
object (Value 1) and the value 2 is always sent out on the second object (Value 2).
The "Reaction to rising edge" parameter specifies whether the "Value 1 for rising edge" or the
"Value 2 for rising edge" is sent out for rising edge.
Alternatively, Value1/Value2 can also be alternatingly set for a rising edge, i.e. after Value 1
was sent (or received), a renewed operation will send out Value 2. After it is operated again,
Value 1 is again sent out.
The values 1 and 2 are specified via the parameters "Value 1" and "Value 2".
The "No reaction" setting causes no telegram to be sent out for a operation of the button.
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
Application "1-button value transmitter"
No reaction
Value 1
Value 2
Alternating value1/value2
No reaction
Value 1
Value 2
Alternating value1/value2
│37
Advertisement
Table of Contents
