Table of Contents
Advertisement
10.6
Application "1-button short-long operation"
NOTE
The application is valid for the following parts of the device:
■
■
■
■
The application makes two separate functions available on one side of the button which can be
called up via a short or long button press, while the other side of the button can be assigned a
further "button-oriented" function. In each case, the application makes a separate set of
parameters and communication objects available for the 1st and the 2nd button.
10.6.1
General parameters - Object type
Options:
The application "1-button short-long-operation" makes two communication objects available:
"Reaction for short operation" and "Reaction for long operation". The bit size of both
communication objects is specified together via the "Object type" parameter.
For the most diverse applications, the bit size of the communication objects can be adapted
from "1-bit" up to "4-byte unsigned" via "Object type".
–
1 bit: switching functions (e.g. On/Off, enabled/blocked, true/untrue)
–
1 byte 0 - 100%: percentage values (0 = 0%, 255 = 100%)
–
1 byte 0 - 255: arbitrary values from 0 to 255
–
2-byte float: floating point value (physical values such as temperature or brightness)
–
2-byte signed: arbitrary values from -32768 to +32767
–
2-byte unsigned: arbitrary values from 0 to 65,535
–
4-byte float: floating point value (physical values)
–
4-byte signed: arbitrary values from -2147483648 to 2147483647
–
4-byte unsigned: arbitrary values from 0 to 4294967295
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
Button 1 / rocker 1
Button 2
Button 3 / rocker 2
Button 4
1 bit
1 byte 0 - 100%
1 byte (0 - 255)
2-byte float
2-byte signed
2-byte unsigned
4-byte float
4-byte signed
4-byte unsigned
Application "1-button short-long operation"
│32
Advertisement
Table of Contents
