Extended Parameters - Value For Object 0-4 - ABB i-bus KNX 6108/06-500 Technical Reference Manual

10.10.5 Extended parameters - Value for object 0-4

NOTE
The options are dependent on the setting of the "Object type for object 0-4"
parameter.
Options:
Value 0-4 is specified here which is sent out at a multiple operation (1-5) of the button.
– 1 bit: switching functions (e.g. On/Off, enabled/blocked, true/untrue)
– 1 byte 0 - 100%: percentage values (0 = 0%, 255 = 100%)
– 1 byte 0 - 255: arbitrary values from 0 to 255
– 2-byte float: floating point value (physical values such as temperature or brightness)
– 2-byte signed: arbitrary values from -32768 to +32767
– 2-byte unsigned: arbitrary values from 0 to 65,535
– 4-byte float: floating point value (physical values)
– 4-byte signed: arbitrary values from -2147483648 to 2147483647
– 4-byte unsigned: arbitrary values from 0 to 4294967295
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
Application "1-button multiple operation"
1 bit
1 byte 0 - 100%
1 byte (0 - 255)
2-byte float
2-byte signed
2-byte unsigned
4-byte float
4-byte signed
4-byte unsigned
│53