General Parameters - Offset Of The Temperature Sensor (K) - ABB i-bus KNX 6108/06-500 Technical Reference Manual

10.22.4 General parameters — Offset of the temperature sensor (K)
Options:
If the measured temperature is distorted by external influences or the device is mounted at a
location where it is always constantly being measured too much or too little, a compensation
value for the temperature measurement can be set. The compensation value is specified via the
"Offset of the temperature sensor" parameter. The mounting location of the controller and the
suitable selection of the parameter settings are decisive for a good temperature reading.
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
-12.8..12.7
Application "Temperature sensor"
│87