Table of Contents
Advertisement
10.6.5
Extended parameters - Value 1 for short operation
NOTE
This parameter is only visible if the "Reaction at brief operation" parameter is set
on either "Value 1" or "Alternating Value1/Value2".
Options:
Value 1 is specified here which is sent out at a short operation of the button. This is dependent
on the setting of the "Object type" parameter.
10.6.6
Extended parameters - Value 2 for short operation
NOTE
This parameter is only visible if the "Reaction at brief operation" parameter is set
on either "Value 2" or "Alternating Value1/Value2".
Options:
Value 2 is specified here which is sent out at a short operation of the button. This is dependent
on the setting of the "Object type" parameter.
10.6.7
Extended parameters - Value 1 for long operation
NOTE
This parameter is only visible if the "Reaction at long operation" parameter is set
on either "Value 1" or "Alternating Value1/Value2".
Options:
Value 1 is specified here which is sent out at a long operation of the button. This is dependent
on the setting of the "Object type" parameter.
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
Description of application and parameters
Application "1-button short-long operation"
Off
On
Off
On
Off
On
│34
Advertisement
Table of Contents
