Knx Control Interface: Crestron Cgeib-Ip; Introduction; Features And Functions; Specifications - Crestron CGEIB-IP Operations & Installation Manual

Crestron CGEIB-IP
KNX Control Interface: Crestron
CGEIB-IP

Introduction

Operations & Installation Guide – DOC. 0009
The Crestron CGEIB-IP is a control interface by which a Crestron control system
can be coupled to a KNX installation using either RS232 or Ethernet (TCP/IP). Also,
the Crestron CGEIB-IP filters the desired information out of received KNX
messages and sends them to the Crestron control system via the same interface
(RS232 or TCP/IP), which provides the Crestron installation with live updates of the
KNX installation.

Features and Functions


DIN-rail mountable

Control up to 500 group addresses on a KNX/EIB network

Equipped with an RS232 port and a TCP/IP port

Capable of receiving live updates. No polling necessary

Specifications

Specifications for the Crestron CGEIB-IP are listed in the following table.
Crestron CGEIB-IP Specifications
SPECIFICATION
Power
Power Usage
Minimum 3-Series Control
1,2
System Update File
Environmental
Temperature
Humidity
KNX Control Interface
DETAILS
24 V AC/DC
Version 3 or later
32º to 131º F (0º to 55º C)
0% to 93% RH (non-condensing)
KNX/EIB Control Interface: Crestron CGEIB-IP  1